E-2
10. Slightly raise the punch kit and insert the plate
removed in step 7 between the finisher and the
punch kit.
Note:
Align the three dowels on the finisher with the
three dowel holes on the plate.
11. Secure the plate to the finisher with the three
screws removed in step 7.
12. Align the middle mark on the punch kit with the
dowel on the plate and secure the punch kit (two
screws).
Note:
Use the screws removed in step 6.
13. Attach the upper cover removed in step 5 to the
finisher (four screws).
14. Attach the exit tray removed in step 4 to the fin-
isher.
15. Install the furnished punch box.
16. Affix the furnished label to the front door of the
finisher as shown in the illustration.
17. Mount the finisher to the machine.
Note:
For the finisher mounting procedures, see installa-
tion manual for finisher.
A10EIXC010DB
Dowel
A10EIXC011DA
A10EIXC012DA
A10EIXC013DA
A10EIXC014DA
III. Punch option setting
1. Plug the power cord into the power outlet and
turn on the machine.
2. Display the Service Mode screen. (For details of
how to display the Service Mode screen, see the
service manual.)
3. Touch “Finisher.”
4. Touch “Punch option setting.”
5. Touch “PK-517” and select a desired number of
holes.
6. Touch “decision.”
7. Touch “END.”
8. Touch “Exit” on the Service Mode screen.
IV. Punch hole deviance adjustment
1. Make a copy in the punch mode.
(Refer to the user’s guide (copy operations))
2. Fold the copy into halves and check for possible
deviation in the punch hole positions.
Specifications: 0 ± 2.0 mm
* If the positional deviation of the punch holes is
not within the accepted range, take the following
steps.
3. Open the upper cover of the finisher.
4. Loosen the two screws that hold the punch unit in
place.
5. Move the punch unit back and forth to adjust its
position, referring to the guide lines.
6. After the adjustment, tighten the two screws loos-
ened in step 4.
7. Close the upper cover of the finisher.
8. Make a copy and check the punch hole positions
again.
A10EIXC018DA
A10EIXC019DA
A10EIXC015DA
Screw
A10EIXC016DA
A10E-9550-01E.fm 2 ページ ２００９年７月２日 木曜日 午後６時２３分
