E-5
III. Installation Procedures of FAX Kit (FK-
502)
1. Remove the shield cover (two screws).
2. Check to make sure that SW2 on the FAX Control
Board is set to “LINE-1.”
3. Insert the FAX Kit and tighten the two shoulder
screws.
Note:
When inserting the board, align it with the slits.
4. Reinstall the right rear cover that has been
removed in step 7 on P. E-2 (three screws).
5. Plug in the IR connector that has been removed
in step 6 on P. E-2 and close the right door.
6. Reinstall the upper rear cover that has been
removed in step 5 on P. E-2 (four screws).
7. Insert the Dust Filter that has been pull out in step
4 of P. E-2.
4038IXC058DA
4037IXC166DC
4038IXC059DA
4038IXC060DB
4038IXC047DB
4038IXC117DA