Konica Minolta magicolor 7450, Руководство по обслуживанию

Страница: 146 / 346

Field Service Ver. 1.0 May 2006 9. Menu
109
magicolor 7450
Adjustment / Setting
9.4.4 COLLATE
9.5 QUALITY MENU
9.5.1 COLOR MODE
9.5.2 BRIGHTNESS
9.5.3 PCL SETTING
A. CONTRAST
B. IMAGE PRINTING
(1) RGB SOURCE
Function • Sets printing in sets.
Use
• To print several sets of multiple pages.
ON : Print in sets.
OFF : Print in page.
Setting
/procedure • The default setting is OFF.
ON “OFF”
NOTE
• This menu is available only when an optional Hard Disk Kit is installed.
• The setting in the printer driver overrides the setting in this menu.
Function • Sets the color mode for printing.
Use • To specify whether jobs should be printed in color or grayscale.
Setting
/procedure • The default setting is COLOR.
“COLOR” GRAYSCALE
Function • Sets the brightness of the printed image.
Use • To adjust the brightness of the printed image.
Setting
/procedure • The default setting is 0 %.
-15 % -10 % -5 % “0 %” +5 % +10 % +15 %
Function • Sets the contrast of a PCL printed image.
Use • To adjust the contrast of a PCL printed image.
Setting
/procedure • The default setting is 0%.
-15 % -10 % -5 % “0 %” +5 % +10 % +15 %
Function • Sets the RGB color space of the image to be printed.
Use
• To set the input RGB color space that is used for printing the image (picture).
sRGB : Profile that has been preset to the printer.
DVICE COLOR : It uses the Device color in the color space.
Setting
/procedure • The default setting is sRGB.
DEVICE COLOR “sRGB”