E-2
<When the working table (WT-506/WT-507) is not
attached to the main body>
7. Attach three supplied cord clamps to the indi-
cated locations on the main body.
8. Route the USB cable as shown in the illustration
and insert the cable into the three cord clamps.
Note:
• Arrange the cable so that it does not interfere
with opening or closing of the right door.
• Be sure to remove slack from the cable.
<When the working table (WT-506) is already
attached to the main body>
7. Route the USB cable as shown in the illustration
and insert the cable into the four wire saddles.
Note:
• Arrange the cable so that it does not interfere
with opening or closing of the right door.
• Be sure to remove slack from the cable.
<When the working table (WT-507) is already
attached to the main body>
7. Route the USB cable as shown in the illustration
and insert the cable into the five wire saddles.
Note:
• WT-507 is able to be applied in C360/C280/
C220.
• Arrange the cable so that it does not interfere
with opening or closing of the right door.
• Be sure to remove slack from the cable.
A165IXC021DA
A165IXC022DA
A165IXC024DA
Wire saddle
Wire saddle
A165IXC023DA
