E-8
(4) Remove the guide from the main unit.
(5) Remove the cover from the main unit as shown
in the illustration. (One screw)
(6) Remove the knockout from the cover removed in
step (5) with nippers.
(7) Remove the cover from the main unit as shown
in the illustration.
(8) Remove the paper backing from the supplied film
and attach it to the main unit as shown in the
illustration.
Note:
• Alignment in vertical direction:
Align the lower edge of the film with the surface
of the cover in the exit section.
• Alignment in back and forth direction:
0 to 2 mm from the edge of the metal sheet
(9) Attach the supplied sensor unit to the main unit
by fitting the two tabs into the holes.
(10) Secure the sensor unit with the supplied
screw A.
0 to 2mm
