E-2
9. Remove the plate from the main body as shown
in the illustration. (Two screws)
Note:
Be careful not to drop the screws into the machine.
10.Fully screw down the supplied shoulder screw.
11. Install the job separator.
Note:
• When installing the job separator, align the U-
groove of the job separator with the shoulder
screw.
• When installing the separator in the C360/
C280/C220 machine, to prevent the corner A of
the separator from hitting against the portion R
of the machine cover, put the corner A of the
separator inside the frame of the machine cover
as shown and then slightly rotate the separator
in the direction of the arrow.
A083IXC034DA
< C360/C280/C220 >
< 423/363/283/223 >
A083IXC040DA
A083IXC035DA
A083IXC041DB
< C360/C280/C220 >
< 423/363/283/223 >
Portion R
Corner A
A083IXC043DA
Insert this side first.
Rotate the job separator into place.
12. Secure the job separator to the machine by the
mounting cover. (The two supplied screw B’s)
13. Connect the hookup cord to the machine.
A083IXC037DA
A083IXC038DA
A083IXC039DB
A083IXC042DA
< C360/C280/C220 >
< 423/363/283/223 >
