Konica Minolta Image Controller IC-402 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 340

Konica Minolta Image Controller IC-402 Скачать руководство пользователя страница 3

Introduction

IC-402

x-2

Trademarks and Registered Trademarks

KONICA MINOLTA and the KONICA MINOLTA logo are trademarks of Koni-
ca Minolta Holdings, Inc.

PageScope is a registered trademark of Konica Minolta Business Technolo-
gies, Inc.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

Ethernet is a registered trademark of Xerox Corporation.

Microsoft, Windows and Windows NT are registered trademarks of Microsoft
Corporation.

PostScript is a registered trademark of Adobe Systems, Inc.

EFI, Fiery and the Fiery logo are registered trademarks of Electronics for Im-
aging, Inc. and are legally registered in the United States and other countries.

The Electronics for Imaging logo, Fiery Remote Scan, Fiery WebScan, and
Fiery WebTools are trademarks of Electronics for Imaging, Inc.

RC4

®

is a registered trademark or trademark of RSA Security Inc. in the Unit-

ed States and/or other countries.

RSA

®

is a registered trademark or trademark of RSA Security Inc. RSA

BSAFE

®

is a registered trademark or trademark of RSA Security Inc. in the

United States and/or other countries.

License information

This product includes RSA BSAFE Cryptographic soft-
ware from RSA Security Inc.

All other product names are either trademarks or registered trademarks of
their respective companies.

Copyright © 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.

OpenSSL Statement

OpenSSL License

Copyright

©

1998-2000 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

«
1
2
3
4
5
...
»

Содержание Image Controller IC-402





















































































































































































































































































































































Отзывы:

Нет отзывов