E-6
(10) Place the cables A and B in the edge cover.
Note:
When installing the upper left rear cover, place the
cables into the cover so that they do not touch the
cover.
(11) To install the covers and other parts removed in
steps (2) to (5), reverse the removal procedure.
(12) Install the upper right rear cover. (Two screws)
Note:
Install the cover pushing the positions shown in
the illustration using both hands.
3. Configuration procedures
<HDD mirroring rebuilding>
(1) Plug the power cord into the power outlet and
turn ON the power switch.
(2) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(3) Touch “State Confirmation.”
(4) Touch “Memory/Storage Adjustment.”
(5) Display the second page touching the arrow
keys.
(6) Select “HDD Mirroring Rebuild.”
(7) Press the start key.
The mirroring rebuilding starts.
Note:
• It takes approximately 1 hour to process the
rebuilding.
• Do not turn OFF the power switch or unplug the
power cord during the process.
• Once the rebuilding is executed, it cannot be
stopped temporarily or terminated forcibly
during the process.
• Jobs can be executed during the process, how-
ever, it takes longer to finish the process.
• For details, see the Service Manual.
<Check the HDD operating condition and the
rebuild condition>
(1) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(2) Touch “State Confirmation.”
(3) Touch “Memory/Storage status.”
(4) Check the status.
