83
82
Troubleshooting
“0” appears as the
number of images
recordable.
Symptom
Cause
Remedy
Function
The memory card has
insufficient free memory
available.
Insert a new memory card,
or erase unneeded images
on the current card.
The LCD monitor
displays “Card
has not been
inserted”
No memory card is
loaded.
Insert a memory card.
The LCD monitor
displays “Card
Error”.
The inserted memory
card has been formatted
on a different camera or
information device.
Reformat the memory card
on the camera (see page
57).
Record-
ing
“WRITE
PROTECT”
appears on the
LCD monitor.
The write protect
switch is activated (SD
memory card).
Release the write protect
switch, or insert a different
memory card.
Card access LED
flashes.
Image data is being
written to the memory
card.
Remove your finger from the
shutter release button and
wait for the flashing to stop.
Caution LED
flashes slowly.
The flash is charging.
Caution LED
flashes rapidly.
Camera shake warning,
indicating that a slow
shutter speed has been
selected.
Use a tripod or other means
to stabilize the camera.
The number of
images
recordable does
not change when
a picture is taken.
The file size of the
recorded image was
very small.
File size and number of
pictures recordable differ
depending on the image
quality setting and subject
conditions; not a
malfunction.
Green LED
flashes.
Focus is not locked on
subject (shutter will
operate).
Use the focus lock function
(page 41) to lock the focus
on a part of the subject with
higher contrast before final
composition of the image.
Focus mark
flashes.
¶
Grasp the body of the adapter when connecting and
disconnecting it from a power outlet, and similarly grasp the
connector plug when connecting and disconnecting it from the
camera body. Pulling on the cords may cause internal breakage
of the wires, resulting in fire or electric shock.
¶
If you observe any damage to the AC adapter, broken wires, or
faulty connector contacts, discontinue use and consult your
place of purchase or Konica Service Center as soon as possible.
CAUTION
¶
Never use the AC adapter when it is incompletely connected to a
power outlet. Faulty contacts may cause abnormal heating, fire,
or electrical shock.
¶
Do not tamper with the cord or subject it to excessive force, since
the cord may be damaged, resulting in fire or electrical shock. If the
cord is so damaged as to expose the wire core, discontinue use
immediately and consult your place of purchase or Konica Service
Center.
¶
Due to the danger of electric shock, do not attempt to open the
AC adapter’s cover, or to disassemble, repair, or modify the
adapter.
¶
Do not use the adapter when the plug is covered with dust, or do
not bring pieces of metal near it, since current may travel
through the dust and metal and cause a fire or electric shock. If
dust collects on the adapter plug, disconnect it from the
electrical outlet and clean away the dust before using.
¶
If the adapter emits smoke or abnormal odors, or if you drop or
damage the adapter, discontinue use and consult your place of
purchase or Konica Service Center, since continued use may
result in fire hazard.
¶
Do not connect the AC adapter to any source of power other
than a household AC outlet for which it is rated. Using the
adapter with other voltages or ratings may cause the hazard of
fire or electrical shock.
WARNING
* The SD logo is a registered trademark.
* QuickTime and the QuickTime logo are trademarks used under license.
QuickTime is a trademark registered in the United States and other countries.
* All brand and product names are the registered trademarks or trademarks of
their respective owners.
名称未設定-1
2001.7.6, 7:03 PM
Page 82-83
Adobe PageMaker 6.5J/PPC
