Konica Minolta bizhub PRESS C71cf, Быстрое руководство, Страница: 114 / 143

5-20
5.5 A media feeding error occurs
)
Changing the media tension
If media meandering is not solved, raise the tension by one level from the current setting according to the table below.
For details about changing the media tension, refer to page 3-15.
Tips
Before changing the media tension, perform the following: For details, refer to page 5-17.
-
Check the media tension
- Check the Position of the Media and Parts
-
Clean Adhesive sticking on the Parts
- Adjusting the aligning roller
Level 7 is only used when paper width is 250 mm. For details about the media tension setting, refer to "User's
Guide[User Maintenance]/[Handling paper]".
Level Position of the
Tension Roller
2 Aligning Roll-
er Position of the
Tension Roller
4 Air Level of the
Paper Feed
Loop Fan
Lower the ten-
sion
+
,
Raise the ten-
sion
1 Bottom Rotate Bottom Weak
2 Bottom Rotate Bottom Strong
3 Top Rotate Bottom Weak
4 Top Rotate Bottom Strong
5 Top Fix Bottom Weak
6 Top Fix Bottom Strong
7 Top Fix Top Strong