Konica Minolta BIZHUB 600, Руководство пользователя

Страница: 257 / 272

11
Appendix
11-2 bizhub 750/600
Ap
pen
dix
Ch
ap
te
r 11
11 Appendix
11.1 Error Messages
Network Error Message List
If any of the following messages appear while routing, perform the opera-
tions described below.
Message Cause and Remedy
Memory Overflow The memory has become full. Change the scanning settings, and
then try scanning again.
Search Timeout The connection to the server was cut. Log on again or try transmit-
ting again.
Server Connection Error The connection to the server failed. Check the connection settings,
and then try transmitting again.
Logon Error The server could not be logged on to. Check the connection settings,
and then try transmitting again.
Specified Folder Does
Not Exist The folder specified for FTP or SMB transmission does not exist.
Check the settings, and then try transmitting again.
Server Disk Full The server is full. Contact the server administrator and create free
space.
Transmission Error Transmission failed. The circuits may be malfunctioning or the set-
tings may be incorrect. Check the settings, wait a while, and then try
transmitting again.
Data Size Too Large Since the size of the data specified by the server was exceeded,
transmission was not possible. Check with server administrator for
the limitations, change the scanning settings, and then try scanning
again.
bizhub_750.book Page 2 Monday, February 27, 2006 2:41 PM