Konica Minolta bizhub 185, Руководство пользователя

Страница: 33 / 146

bizhub 185 3-3
3.1 Turning on or off the machine 3
3 Using this machine
3.1 Turning on or off the machine
0 The default settings are the settings that are selected immediately after the Power Switch is turned on
and before any settings are configured from the Control Panel , and those that are selected when the
Reset
key is pressed to cancel all settings configured from the
Control Panel
. The default settings can
be changed.
0 If no operation is performed for a specified length of time, the machine automatically returns to the de-
fault settings.
0 If no operation is performed for a specified length of time, the machine automatically enters a mode
where it conserves energy. This is referred to as the Sleep mode. When the machine is in the Sleep
mode, the indicator on the
Start
key remains lit in green, but the
Display
goes off. The machine returns
from the Sleep mode when any key on the Control Panel is pressed.
0 [Warming Up] appears on the
Display
, and the
Status LED
blinks when the
Power Switch
is turned on
or the machine returns from the Sleep mode. Loading an original and pressing the Start key with the
Start key lit up green allows you to reserve a copy job. After the machine has finished warming up, the
original will be scanned.
0 Do not turn off the Power Switch while a queued job or stored data is waiting to be printed. The jobs
yet to be printed will be deleted.
0 Settings that have not been registered and jobs in the printing queue are cleared when the Power
Switch is turned off.
0 To turn the Power Switch on immediately after turning it off, wait for 10 or more seconds before turning
it on again. Not doing so may result in an operation failure.
0 Do not turn off the Power Switch while images are being scanned, transmitted, or received. Data being
scanned or communicated will be deleted.
0 Do not turn off the Power Switch during the copying or printing process. If you turn it off, a paper jam
may occur.
0 When a paper jam occurs, the Error will light up.
1
To turn the power on, press n on the Power Switch .
Check that the
Display
is turned on.
2
To turn the power off, press o on the Power Switch .
d
Reference
To change the default settings for copy:
Press the Menu/Select key ö [UTILITY] ö [COPY SETTINGS].
To change the length of time before switching to the Sleep mode:
Press the Menu/Select key ö [UTILITY] ö [MACHINE SETTING] ö [SLEEP MODE].
To change the length of time until the Auto Panel Reset function is operated:
Press the Menu/Select key ö [UTILITY] ö [MACHINE SETTING] ö [AUTO PANEL RESET].