Konica Minolta bizhub 163, Руководство по обслуживанию

Страница: 281 / 588

6. Utility Mode Field Service Ver. 1.0 Apr. 2007
24
FK-506
Adjustment / Setting
C. DEFAULT TX
D. HEADER
6.3.6 FAX RX OPERATION
A. MEMORY RX MODE
B. NO. of RINGS
Functions
• This function can be used to set the default of TX mode.
Use
Setting/
Procedure • The default setting is “MEMORY TX”.
“MEMORY TX” ADF TX
Functions • This function can be used to set the default setting ([ON] or [OFF]) for adding the
header (date sent, sender's name and fax number, etc.) when sending faxes.
• This function is not available in the United States.
Use
Setting/
Procedure • The default setting is “ON”.
OFF “ON”
The contents of registration.
• TX data and time.
• Transmitter's own name.
• Transmitter's own tel number.
• Session number.
• Page number.
• Total page number (only displayed by use the memory TX job).
• It is selectable by soft switch to transmit only pages which have failed to transmit, if
communication error occurs on the way transmitting document. In this case, page
number on Header Print is continued from the page number of the document suc-
cessfully transmitted. Whether user setting is allowed or not is selectable with Soft
switch.
• For North America, Header print is set ON, and setting change to OFF by the user is
not allowed.
• Attaching Header Print:
Image within 4 mm (1/4 in) top margin of transmitting document is not transmitted
and Header print data is attached.
Functions
• This function can be used to set whether or not to receive memory RX.
Use
Setting/
Procedure • The default setting is “OFF”.
“OFF” ON
Functions
• This function can be used to set the number of call sound until the incoming call is
answered automatically.
Use
Setting/
Procedure • The default setting is “2”.
• Setting value: 1 to 16