Konica Minolta bizhub 163 Скачать руководство пользователя страница 584

Страница: 584 / 588

Field Service Ver. 1.0 Apr. 2007

5. Utility Mode

IC-206/NC-503

Adjustment / Setting

(6) AUTO RECEPTION

(7) REPLY ADDRESS

(8) HEADER PRINT

D. USER SETTING
(1) NTP SERVER ADDRESS

(2) TIME ZONE

Functions

• This function is used to specify the time interval (in minutes) for checking E-mail,

when Auto Reception is enabled.

Use

Setting/
Procedure

• The default setting is “OFF”.

“OFF”

• When [ON] is selected, set the interval time (minute) to check a mail.

The default setting is “15 min”. (1-60min)

NOTE
• FIt will be displayed only when the FK-506 is mounted.

Functions

• This function is used to enter the e-mail address to be used when sending notification

of an error, if an error occurs while receiving an Internet fax.

Use

Setting/
Procedure

• Up to 64 characters can be entered for the reply address.

NOTE
• FIt will be displayed only when the FK-506 is mounted.

Functions

• This function is used to specify whether or not to print header information when print-

ing E-mails that have been received.

Use

Setting/
Procedure

• The default setting is OFF.

“OFF”

NOTE
• FIt will be displayed only when the FK-506 is mounted.

Functions

• This function is used to enter NTP server address.

Use

• This function is used to set the precise time from the NTP server.

Setting/
Procedure

• Input the address of NTP server using the 10-key, and press OK key.

NOTE

• FIt will be displayed only when the FK-506 is unmounted.

Functions

• This function is used to set the time gap from the standard time added to the mail

header at mail sending.

Use

• This function is used to change the time gap from the standard time.

Setting/
Procedure

• Select the corresponding time zone, and press OK key.

NOTE
• FIt will be displayed only when the FK-506 is unmounted.

Содержание bizhub 163













































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание bizhub 163

Отзывы:

Похожие инструкции для bizhub 163

Бренды по названию

Популярные бренды

Konica Minolta bizhub 163, Руководство по обслуживанию

Результаты поиска

Содержание bizhub 163

Отзывы:

Похожие инструкции для bizhub 163

Бренды по названию

Популярные бренды