Konica Minolta AUTOREFLEX A Скачать руководство пользователя страница 9

WATCHING METER IN VIEWFINDER

Correct Exposure Range:

The stopping of the Meter Needle #2 within the range of correct exposure (or somewhere on the f-

number scale for the used lens) is an indication of the feasibility of taking pictures under the Electric-Eye system. Here, the

meter needle shows the aperture to which the taking lens is to be set for a shot.

Warning Marks and Mark for the Indication of Fnumber at the Full Opening of the Lens:

The red mark visible on the top

of the f-number scale visible in the field of view is a mark for the warning of underexposure for an f/1.2 lens. If the lens is not f/

1.2 in brightness, the Mark for the Indication of the F-Number at the Full Lens Opening (43) will show the f-number at the full

opening of the taking lens. If the meter needle is aligned with this mark, pictures will be under-exposed. The signal placed at the

bottom of the f-number scale is a warning mark for over-exposure. If the meter needle is brought in line with this Over-exposure

Warning Mark 40, it will be impossible to secure a correct exposure.

Index Point for Stopped-Down Aperture Measurement :

When the lens is stopped down for the measurement of light the meter needle will be aligned with the Index Point 39, if a

combination of shutter speed and lens aperture which assures correct exposure for the film used in the camera comes out.

Manual Aperture Indicator Mark: "M", the Manual Aperture Indicator Mark 44,, indicates the non-alignment of the Electric Eye

Mark 

I~ 

of the Aperture Ring 12 with the index mark for a fully automatic aperture (Electric-eye) lens. When the camera is not

used under the Electric-eye system, the alphabet "M" is visible at all times, indicating that the aperture of the lens may be

manually operated.   This manual was created by www.butkus.org/chinon and should only be found at my site.

LIGHT MEASUREMENT AT FULL LENS OPENING

ELECTRIC-EYE PHOTOGRAPHY

(Light Measurement at Full Lens Opening)

In the event that a lens equipped with a fully automatic aperture under the Electric-Eye system and having an Electric-Eye mark,

pictures may be taken under the Electric-Eye system while light is measured at the full opening of the lens and the viewfinder is

brightened as a result of its full opening.

Содержание AUTOREFLEX A




















Отзывы: