Konica Minolta 0902, Руководство по обслуживанию

Страница: 18 / 302

Chapter 1 Safety Warnings and Cautions
1-6
5. Note following items after operating the equipment.
(1) Turn the power off by prescribed procedure after returning the operation switches and dials to
the positions before usage.
(2) Do not unplug the cables by pulling on cable part or apply unnecessary force.
(3) Note following items for storing location.
•
Store in position where no water spills.
•
Store in location where air pressure, temperature, ventilation, sun light, dust, salt, sulfur,
etc., does not affect the equipment.
•
Note the stability such as inclination, vibration, shock (including transport), etc.
•
Do not store where the chemical is stored or where the gas is generated.
(4) Organize the accessories, cables, electrodes, etc., after cleaning.
6. Clean the equipment so there is no interference on next use.
7. Do not tamper the equipment when it is malfunctioning, and let the professional perform the repair.
8. Do not modify the equipment.
9. Routine maintenance
(1) Always perform a routine maintenance on the equipment and parts.
(2) The equipment must be checked if it works normal and safely when operation is resumed after
it has not been used for an extended period.
10.Operate properly in accordance with the User Manual.
1.2.2 General Caution
Do not perform any operation that is not mentioned in this manual
There are hot spots and high voltage parts inside the equipment, and there is a possibility
of burn or electrification if operated wrongly.
Always follow the contents of the warning label
Always follow the cautions mentioned in this manual and the contents of the warning
label affixed to the equipment. Personal injury or destruction of the equipment may result
if it is not followed.
This equipment is equipped with a laser generating device (Class IIIb)
Major damage could happen when this laser ray is projected on skin or eyes.
Use the dedicated protection glasses when performing operation confirmation with the
power on.
This equipment can be considered as class I laser product only when the safety interlock
is not released.
Person with cardiac pacemaker should not get close to this equipment
There is a possibility of electromagnetic interference to a cardiac pacemaker
Removal of the external covers
To prevent danger, do not remove the external covers or touch inside the equipment
except the service engineer with official training.