Kongsberg Simrad RA83, Руководство по обслуживанию

Страница: 3 / 210

Safety Symbols
To prevent the risk of personal injury or damage to the equipment, the following safety
symbols are used to indicate safety-related information. Be sure that you clearly un-
derstand the meanings of the symbols BEFORE using the equipment.
Symbols Used in Manual
This indicates a very dangerous procedure that could result
in serious injury or death if not performed properly.
DANGER
!
This indicates a hazardous procedure that could result in
serious injury or death if not performed properly.
WARNING
!
This indicates a hazardous procedure or danger that could
result in light-to-severe injury, or that might damage the
equipment, if proper precautions are not taken.
CAUTION
!
Safety Symbols Used on Equipment
The following safety symbols are used inside or on the equipment near operation lo-
cations to provide information about safety items and operation precautions. Insure that
you clearly understand the meanings of the symbols and take the necessary precau-
tions BEFORE using the equipment.
This indicates high voltages with a risk of serious electric shock if the part is
touched. NEVER touch the part with bare hands, etc.
The symbol prohibits the operation shown inside the symbol. (The example
on the left prohibits disassembly.)
The symbol indicates that the operation inside the symbol is potentially
hazardous. (The example on the left indicates that the plug should be held
when disconnecting it from the AC outlet.)
This indicates the ground (earth) terminal. If the equipment cannot be
grounded via the power cord, connect this terminal to ground. There is a risk
of serious electric shock if the equipment is not grounded.
RA80_90 series
Marine Radar
Service Manual
93842105-00
i