Kongsberg Simrad ES80, Руководство по установке, Страница: 286 / 312

284
416739/A
Unpacking mechanical units, page 285
Unpacking electronic and electromechanical units, page 286
Unpacking transducers, page 287
Unpacking standard parts and units
Prior to installation or use, parts and units must be inspected, and then unpacked from their
transport boxes. It is important that this unpacking is done without inflicting damage to
the equipment.
Context
This procedure provides the basic tasks of unpacking units (main unit, spare parts etc) from
boxes shipped from Kongsberg Maritime.
Note
If the unit in question is not unpacked for immediate use, you may consider storing it
unopened in its original box. However, it may be useful to open the box to check its contents
for damage and retrieve any accompanying documentation.
Do not use a knife to open cardboard boxes - the contents may be located close to the
surface, and can then be damaged by the blade.
Procedure
1 Check the carton before opening it to ensure it shows no signs of dropping, immersion
in water or other mishandling.
1 If external damage is detected, open the box to check its contents.
2 Request that a representative of the carrier to be present while the box is opened,
so any transportation damage can be identified and documented.
3 If a unit has been damaged, prepare an inspection report stating the condition
of the unit and actions taken.
Describe the damage, and collect photographic evidence if possible. Return the
inspection report to Kongsberg Maritime as soon as possible.
2 Place the box on a stable work bench or on the floor with the top of the box facing
upwards.
Simrad ES80 Installation Manual