Kongsberg Simrad ES80, Руководство по установке, Страница: 289 / 312

416739/A
287
2 Place it in a stable position on the floor or on the workbench.
3 Inspect the unit for damage.
a If a unit has been damaged, prepare an inspection report stating the condition
of the unit and actions taken.
b Describe the damage, and collect photographic evidence if possible. Return the
inspection report to Kongsberg Maritime as soon as possible.
4 Assuming all is well, open the bag and remove the unit.
5 Take out and keep the documentation.
You will need the documentation if the item shall be returned to us.
6 If applicable, open the unit and check inside.
7 Remove any packing and desiccant material that may be found inside the shipping
container or bag.
8 Collect and keep the relevant user manuals and/or installation documents provided
with the unit.
Unpacking transducers
Prior to installation or use, transducers, sonar heads and hydrophones must be unpacked
from their transport boxes. It is important that this unpacking is done without inflicting
damage to the equipment.
Prerequisites
Observe the procedure for unpacking of standard parts and units.
Context
Transducers may be supplied mounted to a hull unit (if any), or packed separately. Sonar
heads and hydrophones are normally packed and shipped in separate boxes. Boxes are
identified by the order number and the serial number of the unit inside.
Note
Once a transducer, sonar head or hydrophone is unpacked, make sure that the body and
the cabling are not exposed to any mechanical stress. Protect the transducer face with
a padded cover plate to prevent damage.
Transducers may be heavy.
A transducer must always be handled as a delicate instrument. Incorrect actions may
damage the transducer beyond repair.
Equipment handling