Kongsberg M3 Sonar FLS, Руководство по установке

Страница: 14 / 98

12
922-20297011/1.0
Sonar Processor
In this publication, the computer is referred to as the Sonar Processor. The Sonar Processor
contains the operational software, and offers the user interface that allows you to control the
M3 Sonar FLS. It is a vital part of the M3 Sonar FLS Forward Looking Multibeam sonar.
The Sonar Processor runs the M3 Sonar FLS software that
manages communication with the Sonar Head, performs
all beamforming and image processing and presents the
sonar imagery. The Sonar Processor communicates with
the sonar through a standard Ethernet cable.
If you purchase a computer locally, make sure that
the chosen model meets the functional and technical
requirements. The computer must be designed for rugged
use, and the construction must be able to withstand the
vibrations and movements of a vessel.
Power supply
The Sonar Head requires a DC power supply to run.
Normally, the DC voltage is supplied in the location where the Sonar Head is mounted, such
as on a remotely operated vehicle (ROV). A test cable and power supply is available for
order as an accessory. The test power supply uses a 24 VDC switching power supply.
M3 Sonar FLS Installation Manual