Kongsberg KAntrak 1700, Руководство по установке, Страница: 11 / 19

page 8
5. KAntrak™ Installation
Units are designed to be mounted onto a bulkhead, dashboard
or panel. The method is described below. The only required
component is the plastic locking ring (PF0709) supplied with
every KAntrak™.
Instructions:
•
Decide on a location
•
Allow adequate clearance behind the display for cable
connection, to ensure that the cables are not unduly
stressed, and for ventilation. Leave sufficient cable so that
the unit may be removed for servicing.
•
Cut out the 53mm mounting hole.
•
Connect the Deutsch mating part into the housing.
•
Place the KAntrak™ in position, secure by screwing the
locking ring onto the thread on the rear of the unit.