Kongsberg EM 122, Руководство по установке

Страница: 91 / 154

Cable layout and interconnections
Figure 35 Junction Box
Receive array cables
Each transducer module and its cable is identified with a serial number as follows
RX<nnn>
where <nnn> is a numerical value.
Each transducer module is also identified by its physical location in the array (frame).
This location number must be recorded during the installation of the transducer modules,
and written down in the tables provided in this chapter.
Note
In order to ensure proper operation by the EM 122 system, it is of vital importance that
the physical location of the transducer modules fits the designated module number in the
transmit and receive circuitry.
R<n>
where <n> is a number between 1 and 8.
The RX transducer array is physically positioned in athwartship direction under the hull.
• Transducer module number 1 is always the first on the port side.
• Module number 2 is the second on the port side, and so on.
Location of the first module in each array (example) on page 90
317669/B
89