Kongsberg EM 122, Руководство по установке

Страница: 61 / 154

Technical specifications
Technical specifications
This chapter presents the main technical specifications.
Note
Kongsberg Maritime AS is engaged in continuous development of its products and
reserves the right to alter specifications without prior notice.
Topics
• Interfaces on page 59
• Physical specifications on page 60
• Power requirements on page 61
•
Environmental and EMC specifications
on page 62
Interfaces
These interfaces are found on the Transceiver Unit and the Operator Station:
• Serial lines with operator adjustable baud rate, parity, data length and stop bit length
for:
– Motion sensor (roll, pitch, heave and optionally heading) in format supported by
sensors from the main suppliers like Applanix , iXSEA, Coda, Kongsberg Maritime
– Heading NMEA 0183 HDT or SKR82/LR60 or EM attitude format
– Positions in either Simrad 90, NMEA 0183 GGA or GGK format
– External clock in NMEA 0183 ZDA format / Trimble UTC
– Sound speed at transducer
– Sea level height (tide)
– Single beam echo sounder depths
– Output of depth straight down in NMEA 0183 DPT format
– Depth pressure or high input
• Interface for 1PPS (pulse per second) clock synchronisation signal
• USB 2.0 interfaces for data storage, printing or plotting
• Parallel interface for Postscript colour graphics printer/plotter
317669/B
59