Kongsberg ACS500, Инструкция по эксплуатации

Страница: 18 / 148

Kongsberg ACS500
List of parts
Important
See Scope of delivery in the registration form for the units in your system.
General supply conditions
The following general supply conditions apply to this Kongsberg ACS500 delivery.
Topics
• Equipment responsibility on page 16
• Receipt, unpacking and storage on page 16
Receipt, unpacking and storage
Upon accepting shipment of the equipment, the shipyard and/or the dealer should ensure
that the delivery is complete and inspect each shipping container for evidence of physical
damage. If this inspection reveals any indication of crushing, dropping, immersion in
water or any other form of damage, the recipient should request that a representative
from the company used to transport the equipment be present during unpacking.
All equipment must be inspected for physical damage, i.e. broken controls and indicators,
dents, scratches etc. during unpacking. If any damage to the equipment is discovered, the
recipient should notify both the transportation company and Kongsberg Maritime so that
Kongsberg Maritime can arrange for replacement or repair of the damaged equipment.
Once unpacked, the equipment must be stored in a controlled environment with an
atmosphere free of corrosive agents, excessive humidity or temperature extremes. The
equipment must be covered to protect it from dust and other forms of contamination
when stored.
For more information, see the information related to equipment handling.
Related topics
• Equipment handling on page 102
Equipment responsibility
The shipyard performing the installation and/or equipment the dealer becomes fully
responsible for the equipment upon receipt unless otherwise stated in the contract.
16
397128/C