KONG CERAMIC KAMADO GRILL
OPERATION MANUAL
7
ASSEMBLY
(cont.)
9.
Attach the 2x table brackets (13) to the Kamado
Grill (9) using the 8x pre-attached bolts with
their corresponding washers, locking washers,
and nuts per bracket. Please note the position
shown in the diagram below.
Carefully pull the grill when moving. To prevent the potential of grill tipping it over,
never push grill. When the grill is in the desired location, push down the tabs on the
locking casters to set the locks.
10.
Attach the 2x table brackets (14) to the Kamado
Grill (9) using the 8x pre-attached bolts with their
corresponding washers, locking washers, and nuts
per bracket. Please note the position shown in the
above diagram.
11.
Insert the 2x table hinges into each of the table
brackets (13 & 14).
12.
To attach the handle (11) to the lid of the
Kamado Grill (9), use the 2x pre-attached
bolts with their corresponding washers, locking
washers, and nuts per bracket.
The Kamado Grill is now ready to use.
Please ensure that grill curing instructions
are read thoroughly prior to use.
14
11
9
9
12
13
