
Installing batteries
Two AAA batteries are required for operation.
• Remove the battery cover.
• Check the polarity of the batteries and the “+/-” marks
inside the battery compartment.
• Insert the batteries following the marks.
• Push the battery cover back in place.
Pair with a Konftel camera
You are able to pair up to four Konftel cameras to one
remote control. To pair the remote, press below buttons in
the following order:
[*] [#] [F1]:
Camera 1
[*] [#] [F2]:
Camera 2
[*] [#] [F3]:
Camera 3
[*] [#] [F4]:
Camera 4
Select one of multiple cameras
Press the
“CAMERA SELECT”
button corresponding to the
camera you want to operate with
the remote controller.
INSTALLATION
USEFUL TIPS
1
CAMERA SELECT
2
3
4
STD
REV
PRESET
RESET
1
CAMERA SELECT
2
3
4
STD
REV
PRESET
RESET
1
CAMERA SELECT
2
3
4
STD
REV
PRESET
RESET
1
CAMERA SELECT
2
3
4
STD
REV
PRESET
RESET
Set presets
With the Konftel Cam20 and
Cam50 you can set different
presets via the remote control.
Presets are pre-configured
camera positions for swift PTZ.
To set a preset press
“PRESET”
followed by a number.
For example
"PRESET"
then press
"2"
. This will save current camera
position to preset memory 2.
Select presets
To select a preset press one of pre-configurated number
buttons on the remote.
Advanced settings
To make advanced settings, for example to change
exposure or colour settings, press the
“MENU”
button.
Please note! The menu will be displayed on screen when the
camera image is in preview mode.
Launch your preview image here:
1
CAMERA SELECT
2
3
4
STD
REV
PRESET
RESET
1
CAMERA SELECT
2
3
4
STD
REV
PRESET
RESET