MAINTENANCE
HOW TO MAINTAIN
1.
The filter should be cleaned twice a year, and when there is obvious dirt on the filter, it is time.
2.
You must fix the filter properly before running the vacuum cleaner.
3.
The filter can't be cleaned in the washing machine or baked by the blower.
4.
It will reduce the suction power and damge the motor if you use the wet filter.
5.
Steps for maintenance:
1) As in fig.14, press the outlet lock to open the outlet board.
2) As in fig.15, get out the outlet filter.
3) As in fig.16, rotate the HEPA cover to separate it from the chamber cover
4) As in fig.17, get the HEPA cover
5) As in fig.18,
If you have any hair winding removable cleaning.
6) As in fig.19, get the HEPA and wash it.
7) Wash the HEPA cover, the HEPA assembly, the outlet sponge and the dust chamber in the
water without detergent and dry them before use.
8) Fix the HEPA assembly on the chamber cover and make sure three salient cubes should be
stuck in the grooves of the dust chamber.
9) Rotate the HEPA assembly in the direction of the mark on the chamber cover.
10) Assemble the chamber cover assembly and the dust chamber according to the mark outside.
11)As in fig.20, hit the filter rack with your hand slightly.
12) Put the dust chamber assembly into the machine. And in this process, first you should make
the chamber in the right position and then press the handle of the dust chamber, if there is a cluck
it means the operation is successful.
Fig.14 Fig.15
Fig.16 Fig.17
过
滤
