flashing, the lock symbol will appear on
the display and all buttons will be nonfunc-
tional. If you press a button when the child
lock is enabled, the lock symbol will start to
flash, warning you to cancel the lock. To
cancel the lock, press and simultane-
ously again and release the buttons when
the lock symbol starts to flash. The lock
symbol will disappear and all buttons will
be functional again.
Temperature Unit Selection
Function
If you want to set the ambient temperature
unit, which is represented with digital fig-
ures on the display of your air conditioner,
to Fahrenheit (F
°
) instead of Centigrade
Celsius (C
°
), move to a location where
the air conditioner and the remote control
cannot communicate with each other, or
turn your back to the air conditioner. Press
to turn off the remote control and press
and
simultaneously. Each time you
press the buttons, the temperature unit
will change and it will be represented with
C
°
or
F
°
on the display. Repeat the same
steps every time you want to change the
unit when using your air conditioner.
Practical and Useful In-
formation
Do not cool down your room excessi-
vely. This not only expend excess ener-
gy, but it is also bad for your health.
• Avoid direct sunlight inside whi-
le your air conditioner is running. If
there is a sunblind or curtain, keep
them shut.
• Adjusting the direction of vertical
and horizontal fins, ensure tempera-
WARNING:
When the function is active,
do not try to turn the fin on the air outlet, it
will be turned off automatically.
Ionizer Function (*)
You can enable the ioniser function with
. Researches show that the air with
more anion make us feel more lively and
energetic. Ioniser produces anions and dif-
fuse them to the environment air for this
purpose. To disable the function, press
again.
The negative ion emission may cause dust
like particles to accumulate on the indoor
unit of your air conditioner. Hence, make
sure to clean your air conditioner periodi-
cally (once a week) with a wet and soapy
wipe.
WARNING:
During the deleting opera-
tion, certainly cut the power from the fuse
.
Signal Sound Cancellation
Function
When you press the buttons on the re-
mote control with the button, you can
silence the beep sound that indicates that
the command given has been received by
the air conditioner. Press and hold the but-
ton for 2 seconds to turn off the sound, and
if you would like to hear it again, press and
hold it for another 2 seconds.
Child Lock
You can prevent your children from switch-
ing the air conditioner on/off or selecting
inappropriate modes. To enable this func-
tion, press and on the remote control
simultaneously. Release the buttons when
starts to flash on the display of the
remote control. When the symbol stops
30
