Notes:
1. DMX console can not be used in Master-Slave operation (Sound Active or AUTO mode ).
2. There should be only one master unit in Master-Slave operation.
Unpacking:
Thank you for purchasing this product. Please read user guide for safety and operations inf-
Troubleshooting
ormation before using the product. Keep this manual for future reference. This product can
create perfect laser programs and effects since it has passed a series of strictly tests before
1. If the power supply indicator doesn't light up and the laser doesn't work, please check the
delivery. Please check the attachments listed on the page after opening the carton. In the
power supply and the input voltage.
event of carton damage or attachment missing in transit, please contact your dealer or our
2. In Stand-Alone operation, if the power supply indicator is light up and sound active indic-
after sales service department.
ator isn't light up, but the laser is shut off doesn't work.
A. Because sound is too small make for laser shut off in sound active, please increase the
Attachments:
music volume or increase audio sensitivity with sensitivity knob, please check as below.
1. Laser Light: 1PCS
B. Please check if unit has been set up in slave mode, then set up in master mode.
2. Power Cable: 1PCS
3. In Master-Slave operation, slave unit don't function, please check as below.
3. User Guide: 1PCS
A. Make sure to there's only one master in the chain, and the others are set in slave mode.
B. Make sure to control the unit without DMX console controlling.
C. Make sure to take a good quality power cable and connection.
Notice:
4. In DMX mode operation, the laser is OFF and the DMX signal indicator is unlighted, pl-
1. Do not exposure the human eye direct to laser beam.
ease check as below.
2. Do not turn on and off the unit frequently.
A. Make sure to set up the DMX mode.
3. Before using this unit make sure the power supply is ground.
B. Make sure to have a good connection.
4. This unit is intended for indoor use only and should be prevented form water, moisture
5. In DMX operation, the unit can’t be controlled by the DMX console, but the DMX signal
and shake. The working temperature of this unit is 18
～
30
℃
, do not use this continuously
indicator is flashing, please make sure the DMX console and unit have the same channel.
over 4 hours, otherwise it shortens the lifetime of the unit.
6. If the unit is fail, please turn off the unit, then turn on again after 5 minutes.
5. Use cleaning tissue to remove the dust absorbed on the external lenses periodically to op-
timize light output.
After trying the above solution you still have a problem, please contact your dealer or
6. Do not remove or break the warranty label, otherwise it void the warranty.
our company for service.
7. Always replace with the exact same type fuse, replacement with anything other than the
specified fuse can cause fire or electric shock and damage your unit, and will void your ma-
nufactures warranty.
DANGER
LASER RADIATION AVOID EXPOSURE
TO BEAM CLASS 3B LASER PRODUCT
Page 8
Page 1
General instructions
!
