Kompernass KH 2284, Инструкция по эксплуатации и советы по безопасности

Страница: 13 / 75

Setting the
alarm mode
socket). Never use cleaning agents as they could damage
the housing.
Insert the plug into a mains socket (make sure the mains voltage
matches that of the device).
Switch on the radio by moving the function switch into the ON
position.
Set the band selector switch to the required position (VHF or
MW)
. Set the volume using the volume control .
Set the radio to the VHF or medium wave frequency of your
choice using the tuner
.
FM (VHF): Unwind and position the wire aerial for best
reception of VHF.
AM /MW: The radio has a sensitive ferrite aerial.
Press and hold down the TIME button (TIME / TIME-SET)
whilst pressing the HOURS or MINUTES button until you
see the correct time in the display.
Press the ALARM and HOURS or MINUTES button until
the required alarm time appears in the display.
1 First set the required alarm time as explained above.
2 If you wish to be woken by the buzzer set the FUNCTION
SWITCH
to BUZZ (ALARM). The activated alarm mode is
then shown in the display.
· If you wish to be woken by the radio, set the FUNCTION
13
Connecting
to mains
Radio
reception
Aerials
Setting
the time
Setting the
alarm time
Gb
Manual_alle Sprachen 20.10.2003 15:01 Uhr Seite 13