Kompernass KH 1026, Руководство по эксплуатации

Страница: 5 / 35

- 3 -
Items supplied
Water boiler
2 Beakers
2 Teaspoons
Operating instructions
Operating Elements
1 Lid
2 On switch
3 Cable storage
4 Power cable
5 Voltage selector switch
6 Control lamp
Commissioning
• Before taking the appliance into use, ensure
that ...
– the appliance itself, the power cable and the
plug 4 are in a serviceable condition, and,....
– all packaging materials have been removed
from the appliance, and...
– the correct power rating has been selected at
the voltage selector switch 5 .
Risk of electric shock!
ALWAYS remove the plug from the mains socket
before pouring water from the appliance!
• Fill the appliance with water up to the MAX
marking and let it come to a full boil once –
as described in the next section.
• After it has boiled, pour this water away.
• Rinse the water boiler out with clear water.
• Fill the appliance with water once again, up
to the MAX marking, and then bring it to boil.
When done, pour this water away also.
The appliance is now ready for use.
Boiling water
Danger
NEVER take the water boiler into use if the electrical
connections are wet resp. moist – there is a risk of
you receiving an electric schock!
Injury hazard
For safety reasons, the lid 1 should not be opened
while the water is boiling or is very hot. There is a
risk of receiving severe scalds.
Notice
Always use freshly drawn water. Do not consume
any water that has already stood in the water boiler
for longer than one hour. Do not reboil water that
has cooled down. Always pour old water away.
Microbes could have formed in it!
• Check to ensure that the setting of the voltage
selector switch 5 corresponds to that of the local
power supply. If necessary, adjust the voltage
selector switch
5 to the correct setting.
• Open the lid 1 .
• Hold the water boiler upright while filling it. Only
in this way can you correctly read the interior
markings in the water boiler.
Fill the water boiler to no further than the MAX
marking, to ensure that no boiling water splashes
out.
• First close the appliance lid 1 .
• Now insert the plug into the mains power socket.
IB_KH1026_E42315_LB4 16.01.2009 8:54 Uhr Seite 3