Kompernass 300129, Руководство по эксплуатации

Страница: 29 / 44

■ 26
│
GB
│
MT
KM 600 A1
4) Depending on what you want to do, fit the
kneading hook
0
, whisk
q
or beater
w
onto
the drive shaft
7
:
–
Fit the kneading hook
0
, whisk
q
or
beater
w
(hereafter "attachment") onto the
drive shaft
7
so that the two metal pins on
the drive shaft
7
lock into the recesses on
the attachment
0 q w
.
–
Push the attachment
0 q w
firmly onto
the drive shaft
7
so that the spring com­
presses and turn the attachment
0 q w
anticlockwise a little way (direction ) .
–
Let go of the attachment
0 q w
. It is
now firmly attached to the drive shaft
7
.
5) Add the ingredients you wish to process into
the mixing bowl
6
.
NOTE
► Please note that during the kneading or stirring
process, the mixture in the mixing bowl
6
increases in volume or is pressed upward
slightly as a result of the movement . You
should therefore never fill the mixing bowl
6
right up to the top!
6) Press the release button
2
and press the
swivel arm
1
with the mounted attachment
0
q w
downwards into the working position .
NOTE
► If you wish, you can fit the filling accessory
8
onto the lid
9
:
–
Press the filling accessory
8
into the
cut­out on the lid
9
.
Now you can add ingredients even during
operation .
7) Push the lid
9
onto the mixing bowl
6
.
8) Turn the rotary switch
3
to the required level
(see the section "Speed settings") .
After you have finished using your
appliance
1) Turn the appliance off using the rotary switch
3
(Position "OFF") .
2) Remove the lid
9
from the mixing bowl
6
.
3) Push the release button
2
and move the
swivel arm
1
to the highest position .
4) Remove the attachment
0 q w
from the drive
shaft
7
by pushing the attachment
0 q w
against the drive shaft
7
and turning clock­
wise (direction ) at the same time . Then
you can remove the attachment
0 q w
.
5) Remove the mixing bowl
6
by turning it anti­
clockwise and then pulling it upwards .
6) Clean the appliance (see section "Cleaning
and care") .
Cleaning and care
DANGER – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
Never immerse the appliance in water or
any other liquid!
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials . These may damage the surfaces .
NOTE
► We recommend cleaning the appliance
directly after use . This makes food residues
easier to remove .