OPERATION INSTRUCTIONS
How To Use The Digital Control Board:
Preset Settings:
Auto Defrost:
12
• When power is off, the kegerator will save the temperature setting data and remain at that
temperature setting when the power is turned back on.
• The kegerator is equipped with an automatic defrost system. During the process of defrosting the
compressor will stop working and the interior fan will run continuously. The temperature inside will
rise to 42°F. The beer fridge is still running normally. When setting temperature lower (e.g. setting
temperature at 32°F), and with a full load of kegs inside, the temperature reading on the display may
be higher than the preset temperature. This is not a failure.
1.
UP arrow. Used to raise (warm) the set temperature by 1°F or 1°C. Maximum temperature 76°F or 24°C.
2.
DOWN arrow. Used to lower (cool) the set temperature by 1°F or 1°C. Minimum temperature 28°F or -2°C.
3.
Temperature Display. The display indicates the current operating temperature.
4.
F°/C° Display.
5.
Set Temperature. Press this to set the temperature, then press the Up (1) or Down (2) arrow to select your desired
temperature. The Temperature Display (3) will flash then count down from the current temperature to your
selected temp.
6.
The F°/C° button allows you to set the display to read in either Fahrenheit or Celsius.
7.
Power Button. Turns the kegerator on or off.
1
4
3
2
5 6 7
