Step 7
: Stand the supports
upright, so the tent walls are
extended upwards.
Step 8
: Fit the four shorter steel
tubes to the steel ring pins one by
one until they are all fixed into
position.
Step 9
: Locate the hooks that are
attached to the inner tent, and
hook them around the nearest
steel tube.
Step 10
: Adjust the long steel
tubes (in the middle of the tent)
so they are in position.
Step 11
: Insert the steel ring pins
into the long tubes.
Step 12
: Locate the corners of the
tent and insert the tent pegs.
These will be used to hold the tent
down by hammering them down
into the soil/grass. (not shown)
Step 13
: Check that the corners
are fixed in place via the tent pegs
and the tubes are all attached to
their ring pins.
Step 14
: The tent should now
appear as shown above.
Step 15
: The interior of the tent
should appear as shown above.
Step 16
: This section is the front
door to the tent.
Step 17
: The door will appear like
this from inside the tent.
Step 18
: This is the rear ventilation
window.
