3
Safety Requirements
• To avoid accidents and/or unit damage, only a trained technician must carry
out the connection.
• The appropriate Personal Protective Equipment (PPE) attire is worn relative to
the operation being carried out.
• Electrical equipment is rated, connected and earthed in accordance with CE
regulations.
The air handling unit must be plugged in to an electrical outlet (with earth), which is in good order and
corresponds with all requirements of electric safety.
Before starting any operations inside the unit, make sure that the unit is switched off, and the power cable is
unplugged.
• Earth must be installed according EN61557, BS 7671
• The unit should be installed according to Installation and Maintenance Manual.
• Before starting the unit, check correct position of air filters.
• Service maintenance should be carried out only in conformity with the instruc
-
tions specified herein below.
• If main cable is damaged, only manufacturer, service team or trained technician
must change it in order to avoid accidents.
Transportation
The air handling units are ready for transit and storage (1 a, b Pictures). The unit is packed to prevent damage
of the external and internal parts of the unit, dust and moisture penetration.
The unit is packed to box after that corners of the air handling units are protected against the damage – protective
corners are used. The entire unit is wrapped up in protective film. For transit or storage, units are mounted on
timber pallets. The unit is fastened to the pallet with polypropylene packing tape.
Air handling units ready for transit and storage
1 a U
nits ready for transit and storage without kitchen hood
1 b U
nits ready for transit and storage with kitchen hood.
We reserve the right to make changes without prior notice.
Installation and Maintenance Service Manual
1 b Picture
1 a Picture