Page 16 Komfi Rider Skippa
●
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or
outward.
1.
Loosen the armrest adjustment knobs.
2.
Use the attached ring to pull and remove the
detent pin.
3.
Slide the armrests in or out to the desired
width.
4.
Align the adjustment holes on the seat frame
and armrest, then re-insert the detent pin.
5.
Tighten the armrest adjustment knobs.
●
TILLER ANGLE ADJUSTMENT
2
3
1
WARNING! Remove the key from the key switch before adjusting the tiller
or the seat. Never attempt to adjust the tiller or the seat while the Travel
Scooter is in motion.
1
．
Loosen the tiller angle adjustment knob.
2.
Adjust the tiller to the desired position.
3.
Tighten the tiller adjustment knob.