Komatsu PC14R-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 57 / 246

PRECAUTIONS FOR MAINTENANCE
WEAM009300
55
2.8.16 PRECAUTIONS TO BE TAKEN WHEN
HANDLING HIGH-PRESSURE OIL
q
Do not forget that the work equipment circuits are always under
pressure; for this reason, when it is necessary to add or drain
hydraulic oil or to perform maintenance operations or
inspections on the hydraulic circuit, it is advisable to lower the
equipment to the ground and completely release the pressures
and the residual pressure present in the tank.
Small leakages from pipes under pressure and the resulting jets
are extremely dangerous, since they can perforate the skin and
penetrate in the blood circulation or injure the eyes.
For this reason, always wear goggles and thick gloves during
the inspections and use a piece of cardboard or a sheet of
plywood to check for oil leakages.
If you are hit by a jet of high-pressure oil or are injured, even if
slightly, immediately consult a doctor.
2.8.17 PRECAUTIONS FOR MAINTENANCE
OPERATIONS AT HIGH
TEMPERATURES AND HIGH
PRESSURE
q
When the machine is stopped at the end of work, the engine
coolant, the oil and all the components are hot and the hydralic
circuits are under pressure.
In these conditions, if the coolant, the hydraulic oil and the
engine oil are to be drained in order to change them or the
filters, there are serious risks of damage and burns.
Wait for the temperature to lower within the normal operating
range (40–45°C) before carrying out any maintenance
operation.
RYA00960
RKA19370
RKA00230