Komatsu PC130-8, Руководство по ремонту

Страница: 985 / 1043

50 Disassembly and assembly SEN04132-01
PC130-8
7
Installation
1. Using a knife and scraper [5], remove the
remaining adhesive and dam rubber from the
metal sheets (glass sticking surfaces) of the
operator's cab.
a
Remove the adhesive and dam rubber to
a degree that they will not affect adhesion
of the new adhesive. Take care not to
scratch the painted surfaces.
(If the painted surfaces are scratched,
adhesion will be lowered.)
(The figure shows the operator's cab of a wheel
loader.)
2. Remove oil, dust, and dirt, etc. form the stick-
ing surfaces of cab (8) and window glass (9)
with white gasoline.
a
If the sticking surfaces are not cleaned
well, the glass may not be stuck perfectly.
a
Clean the all black part on the back side of
the window glass.
a
After cleaning the sticking surfaces, leave
them for at lease 5 minutes to dry.
(The figure shows the operator's cab of a wheel
loader.)
3. Apply primer (10).
a
The using limit of primer is 4 months after
the date of manufacture. Do not use the
primer after this limit.
a
Use the primer within 2 hours after un-
packing it.
a
Even if the primer is packed again just
after it is unpacked, use it within 24 hours
after it is unpacked for the first time.
(Discard the primer 24 hours after it is
unpacked.)
1) Stir the primers for both of paint and glass
sufficiently before using them.
a
If the primer has been stored in a refrig-
erator, leave it at the room temperature
for at least half a day before stirring it.
(If the primer is unpacked just after
taken out of the refrigerator, water will
be condensed. Accordingly, leave the
primer at the room temperature for a
sufficient time.)
2) When reusing primer brush (11), wash it in
white gasoline.
a
After washing the brush, check it
again for dirt and foreign matter.
a
Prepare respective brushes for the
paint primer and glass primer.
3) Evenly apply the paint primer to the surfaces
to stick dam rubber and its outside surfaces
to apply adhesive on operator's cab (8).
2 Paint primer:

Sunstar primer for painting plane
580 super or equivalent
a
Do not apply the primer more than 2
times.
(If it is applied more than 2 times, its
performance will be lowered.)