Komatsu GD555-3 Скачать руководство пользователя страница 5

8

Superior Serviceability

Easy Access to Service Areas

Large hinged doors are standard and 

provide easy access to the engine and 

radiator service points. Spin-on oil filters can 

be changed quickly.

Lubrication points for articulation joint are 

remote-mounted.

Fuse panel is located in the operator

compartment. Circuits and

fuse sizes are clearly identified.

Tandem oil check point is conveniently 

located at the end of the tandem.

Service meter is located on the left side of 

the steering console, offering a clear view 

from the ground.

Power Train Components

Features a modular design so you can remove

the engine, transmission or final drives

independently for quick service.

M

AINTENANCE

F

EATURES

M

AINTENANCE

F

EATURES

Message Center

The message center monitors the transmission and engine function with

computer sensors. There are six modes available with ability to scroll

through mode selections.

Maintenance-Free Oil Disc Brakes

Komatsu designs and builds multiple-disc brakes that are completely

sealed and adjustment-free. The brakes are oil bathed, hydraulically

actuated and spring-released and are located at each tandem wheel to

eliminate brake loads on the power train and to speed up servicing. A fully

hydraulic brake system eliminates all problems associated with air

systems. The large braking surface provides dependable braking capability

and long life before rebuild.

Friendly Environment

The rubber mounted engine and transmission transmit less engine noise

and vibration to the operator and extend component life.

GD555-3

MOTOR GRADER

9

ENGINE

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D102E-2
Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection
Aspiration . . . . . . . . . . . . . . . Turbocharged and air to air aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 mm 

4.02"

Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 mm 

4.72"

Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . 5.88 ltr 

359 in

3

Gross horsepower

Gear 1~3 . . . . . . . . . . . . . . . . . . . .  110 kW 

147 HP

@2000 rpm

Gear 4~8 . . . . . . . . . . . . . . . . . . . . . . 125 kW 

167 HP

@2000 rpm

Net flywheel horsepower*

Gear 1~3 . . . . . . . . . . . . . . . . . . . . . . 104 kW 

140 HP

@2000 rpm

Gear 4~8 . . . . . . . . . . . . . . . . . . . . . . 119 kW 

160 HP

@2000 rpm

Peak torque

Gear 1~3 . . . . . . . . . . . . . 576 Nm 58.7 kg.m 

425 lb.ft

@1500 rpm

Gear 4~8 . . . . . . . . . . . . . 729 Nm 74.3 kg.m 

538 lb.ft

@1500 rpm

Torque rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 %
Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 blade, pusher
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-stage, dry-type
Electrical . . . . . . . . . . . . . . . . . . . . . . . 24 volt with 50 amp alternator
Battery . . . . . . . . . . . . . . . . 2, low maintenance plus, 12 volt, 112 Ah 

* Net flywheel HP output for standard (SAE J1349) including air cleaner, alternator (not

charging), water pump, lubricating oil, fuel pump, muffler and fan.

TRANSMISSION AND

TORQUE CONVERTER

Full power shift transmission with integral free wheeling stator torque
converter  and lock-up.

Speeds

(at rated engine speed)

S

PECIFICATIONS

S

PECIFICATIONS

Gear

Forward

Reverse

1st

3.3 km/h

2.1 mph

4.4 km/h

2.7 mph

2nd

4.8 km/h

3.0 mph

9.0 km/h

5.6 mph

3rd

6.8 km/h

4.2 mph

19.7 km/h

12.2 mph

4th

9.8 km/h

6.1 mph

39.1 km/h

24.3 mph

5th

14.9 km/h

9.3 mph

6th

21.6 km/h

13.4 mph

7th

29.6 km/h

18.4 mph

8th

42.9 km/h

26.7 mph

BRAKES

Service brake . . . . . . . . . . . . . . Foot operated, sealed oil disc brakes,

hydraulically actuated on four tandem wheels,

13338 cm

2

2067 in

2

total braking surface

Parking brake . . . . . . . . . . . . . . . . Manually actuated, spring applied,

hydraulically released caliper with

transmission interlock

TANDEM DRIVE

Oscillating welded box section . . . . . . . 580 mm x 221 mm 

1'11" x 9"

Sprocket drive chain, single strand . . . . . . . . . . 31.75 mm 

1.25"

pitch

Side wall thickness: Inner. . . . . . . . . . . . . . . . . . . . . . . . 22 mm 

0.88"

Outer . . . . . . . . . . . . . . . . . . . . . . . 19 mm 

0.75"

Wheel axle spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . 1535 mm 

5'0"

Tandem oscillation . . . . . . . . . . . . . . . . . . . . 13° forward, 13° reverse

FRONT AXLE

Type . . . . . . . . . . . . . . . Solid bar construction welded steel sections
Ground clearance at pivot . . . . . . . . . . . . . . . . . . . . . . . 610 mm 

2'0"

Wheel lean angle, right or left . . . . . . . . . . . . . . . . . . . . . . . . . . . 20°
Oscillation, total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32°

REAR AXLE

Alloy steel, heat treated, full floating axle, spiral bevel gear reduction.

WHEELS, FRONT AND REAR

Bearings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .tapered roller
Tires  . . . . . . . . .low pressure, tubeless, 13.00 - 24 - 10 ply rating-G2
Tire rims (demountable)  . . . . . . . . . . . . . . . . . . . . . . . . .9.00 DC x 24

STEERING

Hydraulic power steering providing stopped engine steering meeting
SAE J1511.

Minimum turning radius. . . . . . . . . . . . . . . . . . . . . . . . . . 6.8 m 

22' 4"

Maximum steering range, right or left . . . . . . . . . . . . . . . . . . . . . . 49°
Articulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23°

FRAME

Section, welded unit (w x h) . . . . . . . . . 300 x 294 mm 

11.8" x 11.6"

Side plate . . . . . . . . . . . . . . . . . . . . . . . . . 250 x 12 mm 

9.8" x 0.47"

Vertical section modulus, front frame: 

Minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2140 cm

3

131 in

3

Maximum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4860 cm

3

297 in

3

Linear weight per length, front frame:

Minimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 kg/m 

102 lb/ft

Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 kg/m 

134 lb/ft

Содержание GD555-3








Отзывы: