Komatsu D39EX-22, Брошюра

Страница: 6 / 6

S
PECIFICATIONS
D39-22
CRAWLER DOZER
D39-22
C
R A W L E R
D
O Z E R
10 11
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all
directional movements. Pushing the joystick forward results in
forward machine travel, while pulling it rearward reverses the
machine. Simply tilt the joystick to the left or right to make a turn.
Tilting the joystick fully to the left or right activates counter-rotation.
Hydrostatic Transmission (HST) eliminates steering clutches and
brakes, providing smooth powerful turns. Fully electronic control
enables smooth control. The PCCS utilizes shift buttons to increase
and decrease speed.
Minimum turning radius:
D39EX-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 m 7'3"
D39PX-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 m 7'10"
As measured by track marks on the ground at pivot turn.
UNDERCARRIAGE
Suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rigid type
Track roller frame . . . . . . . . . . . . . . . . . . . Monocoque, large section,
durable construction
Rollers and idlers. . . . . . . . . . . . . . . . . . . . . . Lubricated track rollers
Lubricated tracks
Unique seals prevent entry of foreign abrasive material into pin to
bushing clearances to provide extended service life. Track tension
is easily adjusted with a grease gun.
ENGINE
Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA4D107E-1*
Type. . . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injection
Aspiration . . . . . . . . . . . . . . . . . . Turbocharged, air-to-air aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Bore x stroke . . . . . . . . . . . . . . . .
107 mm x 124 mm 4.21" x 4.88"
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . 4.46 ltr 272 in 3
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, electronic
Horsepower
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . Gross 79.9 kW 107 HP
ISO 9249 / SAE J1349 . . . . . . . . . . . . . . . . . . Net 79 kW 105 HP
Hydraulic fan at maximum speed . . . . . . . . . . . Net 71 kW 95 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2200 rpm
Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Lubrication system
Method . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow
*EPA Tier 3 emissions certified
HYDROSTATIC TRANSMISSION
Dual-path, hydrostatic transmission provides infinite speed changes
up to
8.5 km/h 5.3 mph. The variable capacity travel motors allow
the operator to select the optimum speed to match specific jobs.
Travel control lock lever and neutral switch.
FINAL DRIVES
Two-stage planetary gear integrated into axial piston travel motors.
Compact in-shoe mount reduces risk of damage by debris. Bolt-on
sprocket for easy replacement.
Travel speed
(quick shift mode)
Forward Reverse
1st 0–3.4 km/h 0–2.1 mph 0–4.1 km/h 0–2.5 mph
2nd 0–5.6 km/h 0–3.5 mph 0–6.5 km/h 0–4.0 mph
3rd 0–8.5 km/h 0–5.3 mph 0–8.5 km/h 0–5.3 mph
Travel speed
(variable mode)
Forward Reverse
0–8.5 km/h 0–5.3 mph 0–8.5 km/h 0–5.3 mph
0
0 1 2 3 4 5 mp/h
0 0
5
10
15
US ton
5
10
15
ton
2 4 6 8 km/h
Dra
w
bar Pull
Travel Speed
COOLANT AND LUBRICANT
CAPACITY (
REFILL
)
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 ltr 6.1 U.S. gal
Fuel tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 ltr 51.5 U.S. gal
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ltr 4.0 U.S. gal
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . 60 ltr 15.9 U.S. gal
Final drive (each side) . . . . . . . . . . . . . . . . . . . 3.5 ltr 0.9 U.S. gal
D39-22
Drawbar pull vs. speed.
maximum usable pull depends on
traction and weight of tractor.
DIMENSIONS
OPERATING WEIGHT (
APPROXIMATE
)
Tractor weight:
Including ROPS canopy, rated capacity of lubricant, coolant, full fuel
tank, operator, and standard equipment.
D39EX-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7800 kg 17,196 lb
D39PX-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8160 kg 17,990 lb
Operating weight:
Including power angle tilt dozer, ROPS canopy, operator, standard
equipment, rated capacity of lubricant, coolant, and full fuel tank.
D39EX-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9040 kg 19,930 lb
D39PX-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9480 kg 20,900 lb
DOZER EQUIPMENT
Use of high tensile strength steel in moldboard for strengthened blade construction.
HYDRAULIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise
and responsive control and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic
tank. Piston-type hydraulic pump with capacity (discharge flow) of
99
ltr/min 26.2 U.S. gal/min at rated engine rpm.
Relief valve setting . . . . . . . . . . . . . 27.4 MPa, 280 kg/cm 2 3,983 psi
Hydraulic cylinders . . . . . . . . . . . . . . . . . . Double-acting, piston type
Hydraulic oil capacity (refilling):
Power angle tilt dozer . . . . . . . . . . . . . . . . . . . . . 60 ltr 15.9 U.S. gal
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift. . . . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and float
Blade tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right, hold, and left
Blade angle . . . . . . . . . . . . . . . . . . . . . . . . . . Right, hold, and left
Additional control valve required for ripper.
Positions:
Ripper lift. . . . . . . . . . . . . . . . . . . . . . . . . . . Raise, hold and lower
Number of cylinders Bore
Blade lift 2 75 mm 2.95"
Blade tilt 1 90 mm 3.54"
Blade angle 2 80 mm 3.15"
D39EX-22 D39PX-22
A 1280 mm 4'2" 1280 mm 4'2"
B 2710 mm 8'11" 3250 mm 10'8"
B — 2980 mm 9'9"
C 370 mm 1'3" 445 mm 1'5"
C — 405 mm 1'4"
D 2730 mm 8'11" 2730 mm 8'11"
E 900 mm 2'11" 900 mm 2'11"
F 450 mm 1'6" 450 mm 1'6"
G 2360 mm 7'9" 2360 mm 7'9"
H 4335 mm 14'3" 4335 mm 14'3"
I 2245 mm 7'4" 2245 mm 7'4"
J 2835 mm 9'4" 2835 mm 9'4"
K 53 mm 2.1" 53 mm 2.1"
L 1650 mm 5'5" 1790 mm 5'10"
M 460 mm 18.1" 635 mm 25.0"
N 2110 mm 6'11" 2425 mm 7'11"
O 2490 mm 8'2" 2980 mm 9'9"
O — 2750 mm 9'0"
*Narrow blade for D39PX-22
* Including Hitch
Ground clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 mm 15.2"
D39EX-22 D39PX-22
Number of track rollers (each side) 6 6
Type of shoes (standard) Single grouser Single grouser
Number of shoes (each side) 39 39
Grouser height 53 mm 2.1" 53 mm 2.1"
Shoe width (standard) 460 mm 18.1" 635 mm 25.0"
Ground contact area 21710 cm 2 29970 cm 2
3,365 in 2 4,645 in 2
Ground pressure 40.8 kPa 31.0 kPa
(with dozer, ROPS cab) 0.42 kgf/cm 2 0.32 kgf/cm 2
5.92 psi 4.50 psi
Track gauge 1650 mm 5'5" 1790 mm 5'10"
Length of track on ground 2360 mm 7'9" 2360 mm 7'9"
25
25
B
GL
C
F
E
D
G
I
J
K
M
L N
O
H
A
Overall length Blade Blade Maximum lift Maximum drop Maximum tilt Blade
with dozer* capacity (SAE) width x height above ground below ground adjustment angle
D39EX-22 PAT 4325 mm 2.21 m 3 2710 mm x 980 mm 900 mm 450 mm 370 mm
25
Standard Blade 14'2" 2.89 yd 3 8'11" x 3'3" 2'11" 1'6" 1'3"
D39PX-22 PAT 4325 mm 2.30 m 3 3250 mm x 910 mm 900 mm 450 mm 440 mm
25
Standard Blade 14'2" 3.00 yd 3 10'8" x 3'0" 2'11" 1'6" 1'5"
D39PX-22 PAT 4325 mm 2.08 m 3 2980 mm x 910 mm 900 mm 450 mm 405 mm
25
Narrow Blade 14'2" 2.72 yd 3 9'9" x 3'0" 2'11" 1'6" 1'4"
*
*
*