Komatsu A23001, Руководство по ремонту

Страница: 39 / 41

GENERAL HOMOLOGATED (HEES) SYNTHETIC LUBRICANTS
WB146-5 01-11
3
HOMOLOGATED (HEES) SYNTHETIC LUBRICANTS
Our machines can be filled with synthetic biodegradable hydraulic oil type HEES not of plant origin, therefore use of oils
indicated in the following table is authorized and recommended:
Supplier HEES Synthetic Biodegradable Oil
KOMATSU ---
AGIP ARNICA S 46
ARAL HEF 46 vitam
AVIA SYNTOFLUID N 46
BP BIOHYD SE-S 46
CONDAT CONDAT D 46 K
ELF HYDRELF BIO 46
ESSO HYDRAULIKOIL HE 46
FINA BIOYIDRAN TMP 46 SE 46
FUCHS PLANTOHYD S 46
KENDALL SYNTH NATURA 46 HV
KUWAIT PETROLEUM K8 HOLBEIN 46
MOBIL EAL SYNDRAULIC
MOBIL (USA) ENVIROSYN 46 H
PAKELO GEOLUBE HYDRAULIC EP-46
PANOLIN HLP SYNTH 46
SHELL NATURELLE HFE-46
TAMOIL GREEN HYDRO SAFETY 46
TEXACO HYDRA 46
TOTAL EQUIVIS BIO 46
VAVOLINE UNISYN HLP 32/68
WARNING!
• It Is not possible to mix the synthetic biodegradable oil type HEES with ordinary hydraulic oils, since when the
temperature increases insoluble compounds are generated, which are deposited on filters and clog them (the
maximum concentration of ordinary oil cannot exceed 1% of the total quantity of oil).
• The synthetic biodegradable oil can be used only in the hydraulic system; it cannot be used for the endothermic
motor, the transmissions, the braking system, etc.
• Before introducing synthetic biodegradable oil in the hydraulic system, completely empty the system,
disconnect the cylinders and all parts that may contain ordinary oil, and replace the filter with a new one.
• Start the engine and let it idle without using the work equipment, wait until the oil reaches a temperature of at
least 40
° C (104 ° F), then operate the work equipment, so that all the parts of the system are filled with oil.
• Stop the engine and check the oil level.