PRECAUTIONS FOR OPERATION
SAFETY
2-20
PRECAUTIONS FOR OPERATION
2
BEFORE STARTING ENGINE
2
If there is a warning tag hanging from the work equipment con-
trol lever, do not start the engine or touch the levers .
CHECKS BEFORE STARTING ENGINE
Carry out the following checks before starting the engine at the beginning of the day's work.
q
Completely remove all flammable materials accumulated around the engine and battery, and remove any dirt
from the windows, mirrors, handrails and steps.
q
Check the coolant level, fuel level, and oil level in engine oil pan, check for clogging of the air cleaner, and
check for damage to the electric wiring.
q
Adjust the operator's seat to a position where it is easy to carry out operations, and check that there is no dam-
age or wear to the seat belt or mounting clamps.
q
Check that the gauges work properly, check the angle of the lights and working lamps, and check that the con-
trol levers are all in the neutral position.
q
Adjust the mirrors so that you can get a good rear-view from the operator's seat.
For the details of adjustment, see “ADJUST MIRROR (3-84)“.
q
Check that there are no persons or obstacles above, below, or in the area around the machine.
PRECAUTIONS WHEN STARTING
q
When starting the engine, sound the horn as a warning.
q
Start and operate the machine only while seated.
q
Do not allow anyone apart from the operator to ride on the machine.
q
Do not short circuit the starting motor circuit to start the engine. Short circuit can cause fire.
Содержание 76243
