komamura KC-1000, Руководство пользователя

Страница: 6 / 50

6. MCM2082201-01
Disclaimer
●
We will not be responsible for any inconveniences or disturbances caused in the event of
privacy invasion as a result of camera footages of this product.
●
Before starting an important recording, make sure to take a test recording in order to
confirm a normal recording possible.
●
We do not accept liability for the damage of recording or storing image and/or the missing
opportunity of recording in the case caused by a problem of the unit.
Transportation
● Always turn off the power when transporting.
● Handle the unit with care and avoid heavy shock or vibration.
Care of the unit

Remove dust or dirt on the surface of the lens with a blower (commercially available). Do
not use a spray type blower to clean the lens. Liquid will seep into a lens and eventually
cause internal fog.
Phenomena specific to CMOS image sensors
● The following phenomena that may appear in images are specific to CMOS (complementary
metal-oxide semiconductor) image sensors. They do not indicate malfunctions.

White flecks
Although the CMOS image sensors are produced with high-precision technologies, fine white flecks may
be generated on the screen in rare cases, caused by cosmic rays, etc. This is related to the principle of
CMOS image sensors and is not a malfunction. The white flecks especially tend to be seen in the
following cases:
- When operating at a high environmental temperature
- When you have raised the master gain (sensitivity)

Aliasing
When fine patterns, stripes, or lines are shot, they may appear jagged or flicker.