POLARIS RANGER
800 XP
66
Kolpin Outdoors Inc.
205 N. Depot St.
Fox Lake, WI 53933
Tel: (920) 928-3118
E-mail:
Place the original flange with included flange back to position on engine and fix these by 2 screws M6x50 and washers.
Insert tightening strap on the water hose and connect the hose with tube on the flange and tighten the strap very hard.
You can install back the original hose to the original flange.
NEXT FEW STEPS ARE FOR INSTALLATION ON DIESEL ENGINE
Take out the seat from the UTV and uninstall the original screw (in red circle) from the UTV’s engine.
(Detail view on next page)