114
VEHICLE MAINTENANCE (cont.)
ATV STORAGE (long-term)
When your ATV is to be stored for a period of more than 60 days, certain preparations should be made for
the engine and fuel system to prevent rust and/or corrosion of engine parts.
Supplies Needed:
1.
Vinyl & rubber protectant
4.
SAE 85W-140 transmission oil
2.
Fuel Stabilizer
5.
SAE 15W-40 engine oil
3.
Fogging Oil
6.
Chain and cable lube
7. Brake oil
•
Clean, wash, and dry ATV. Apply vinyl and rubber protectant to all vinyl and plastic surfaces.
•
Add fuel stabilizer to the tank and let run for at least five (5) minutes to get additives through the entire
fuel system.
•
Remove and clean air filter. Before replacing air filter, start engine and lubricate engine with fogging
oil. Replace air filter.
•
Remove battery leads and charge battery with a storage charger.
•
Place unit on stand so tires are not touching the ground and let all the air out. This will keep tires from
getting flat spots.
•
Drain and refill the transmission oil with 7 oz. SAE 85W-140 (see page 115).
•
Drain and refill the engine oil with 28 to 32 oz of SAE 15W-40 API classification SF-SG motor oil (see
page 116).
Содержание ATV-180
Страница 1: ...1...
Страница 68: ...68 OPERATION WARNING DECALS cont Shift pattern FORWARD NEUTRAL REVERSE...