5
© 2019 Kolpin Outdoors Inc.
REV 01
M8 Hardware
included with
Winch
Winch
Mount Plate
(Item #1)
8MM FASTENER TORQUE:
17 ft. lbs. (23 Nm)
10MM FASTENER TORQUE:
30 ft. lbs. (41 Nm)
Mount Plate Installation:
5.
Insert the winch mount plate (item #1) into
position on the bumper as shown.
Note,
insert in correct direction shown, thru
center of bumper.
6.
Install the M10 screws (item #3) thru a M10
flat washer (item #2) at the location shown
in the vehicle and the winch mount plate as
shown. Fasten M10 screws (item #3) with
M10 flat washer (item #2) and locknut (item
#4). (See illustrations 1
-
2 and 1
-
5).
7.
Tighten M10 fasteners to specification.
Ill. 1
-
2
Winch Installation:
8.
Install the winch to the winch mount plate
and bumper using hardware included
with your winch as shown. (See
illustrations 1
-
3 and 1
-
4).
9.
Tighten M8 fasteners to
specification.
Ill. 1
-
3
Ill. 1
-
4
Underneath bumper view
M8 Hardware
included with
Winch
