Kolpa-san EURUS 1500 2F, Руководство пользователя, Страница: 42 / 84

41 / 84
www.kolpasan.eu
the possible layouts of these connections. Their position is allowed to change
to any other location within the dimensions of the item, as long as this position
does not interfere with the function / operation of the elements mounted on the
pillar or a massage cabin. Hot and cold water supply pipes can, if necessary,
be extended or replaced with pipes of suitable length. Kolpa d. d. does not
recognise any claims which might arise from damage made by replacing or the
quality of the replacing pipes.
o
To remove particles from the pipes, the water supply needs to be drained by at
least 25-50 litres of water before connecting the pillar or massage cabin.
o
Inlet of each product connected to a water source is recommended to feature
a stop valve. If this valve is already installed in the existing water installation
scheme and is able to stop water just for your apartment or bathroom, then the
installation of an additional valve is not required. CAUTION! Pay attention to
the dimensions of the valve, as the massage pillars leave very little space for
connection to the water network. Angled or straight ball valves of smaller
dimensions are recommended.
o
We recommend the installation of one-way water flow valves on both the hot
and cold water where water pressure between the hot and cold water might
vary occasionally. Most often this happens in the following cases:
o
When using flow water heater (without the hot water tank).
o
In buildings where hot water is supplied separately from the objects /
devices intended for heating water for a large number of residential
buildings at the same time. Examples: plants in major cities, thermal
springs and the like.
o
In multi-dwelling buildings with a large number of consumers of water.
The purpose of the one-way valves is to prevent return of hot water through
the cold water pipes and vice versa.
For small housing where the water is heated with electric heaters, the one-way
valves are not required.
Where the water is heated through central heating, one-way valves are only
required if property has a very large number of water customers (multi-
apartment block or tower).
o
In areas where the water contains a large quantity of particles (impurities) and
scaling, we recommend to install a device to remove or neutralize
contaminants. This increases the lifetime of massage pillars and greatly
facilitates the cleaning of surfaces and components. To the extent feasible, we
recommend such devices to be installed on the building's main water supply,