3.133
IDN201 Motor Temperature Warning Threshold
If the motor temperature exceeds the threshold, the amplifier sets the corresponding
warning bit in IDN12 (IDN12 C2D bit 3).
Data Length: 2 bytes
Non-Volatile:
no
Data Type:
Unsigned decimal
Write Access:
CP2, CP3, CP4
Minimum:
Run-Up Check:
Maximum:
Cyclic Transfer:
Default:
2500
ASCII Param.:
Units:
Ohm
Version:
3.134
IDN203 Amplifier Shutdown Temperature
When the amplifier temperature (heat sink temperature) exceed the value of the amplifier
shutdown temperature, the amplifier sets the fault bit for amplifier over temperature fault
in C1D (IDN11 bit 1).
Data Length: 2 bytes
Non-Volatile:
Yes
Data Type:
Unsigned decimal
Write Access:
CP2, CP3, CP4
Minimum:
200
Run-Up Check:
Maximum:
850
Cyclic Transfer:
Default:
800
ASCII Param.:
MAXTEMPH * 10
Units:
IDN208
Version:
3.135
IDN205 Cooling Error Shutdown Temperature
When the temperature inside the amplifier housing exceed the value of the cooling error
shutdown temperature, the amplifier sets the fault bit for cooling system fault in C1D
(IDN11 bit 3).
Data Length: 2 bytes
Non-Volatile:
Yes
Data Type:
Unsigned decimal
Write Access:
CP2, CP3, CP4
Minimum:
100
Run-Up Check:
Maximum:
800
Cyclic Transfer:
Default:
700
ASCII Param.:
MAXTEMPE * 10
Units:
IDN208
Version:
3.136
IDN208 Temperature Data Scaling Type
Defines the scaling options for all temperature data.
Bit
Description
0
Scaling Method
0 = 0.1°C
15-1
Data Length: 2 bytes
Non-Volatile:
Fix
Data Type:
Binary
Write Access:
Read-only
Minimum:
Run-Up Check:
Maximum:
Cyclic Transfer:
Default:
0000h
ASCII Param.:
3.137
IDN256 Multiplication Factor 1
The multiplication factor 1 defines the amplifier internal multiplication of an rotary encoder
for the position feedback value 1 (IDN51).
Data Length: 4 Byte
Non-Volatile:
No
Data Type:
Unsigned decimal
Write Access:
CP2, CP3
Minimum:
Run-Up Check:
Maximum:
Cyclic Transfer:
Default:
256
ASCII Param.:
sercos
®
for S300/S700
71
Kollmorgen
04/2016
sercos
®
IDN Set
