manualshive.com logo in svg

Kollmorgen BDS4 Series, Инструкция по установке и настройке

Поделиться
Скачать
Kollmorgen BDS4 Series Скачать руководство пользователя страница 5

© Copyright 1993, Danaher Motion Kollmorgen. All rights reserved 
Printed in the United States of America 
 

NOTICE

 

Not for use or disclosure outside of Danaher Motion Kollmorgen except under written 
agreement. 
All rights reserved. No part of this book shall be reproduced, stored in a retrieval system, 
or transmitted by any means (electronic, mechanical, photocopying, recording, or 
otherwise) without the written permission from the publisher. While every precaution has 
been taken in the preparation of this book, the publisher assumes no responsibility for 
errors or omissions. Neither is any liability assumed for damager resulting from the use 
of the information contained herein. 
This document is proprietary information of Danaher Motion Kollmorgen, furnished for 
customer use ONLY. No other uses are authorized without written permission from 
Danaher Motion Kollmorgen. 
Information in this document is subject to change without notice and does not represent a 
commitment on the part of Danaher Motion Kollmorgen. Therefore, information 
contained in this manual may be updated without notice due to product improvements, 
etc., and may not conform in every respect to former issues. 
This product is covered by U. S. Patents: 

4,447,771 
4,479,078 
4,490,661 
Other (foreign patents pending) 

U. L. is a trademark of Underwriter's Laboratories. 
N. E. C. is a trademark of the National Electric Code. 
Kollmorgen 

GOLD

Line, BDS4, BDS5, and PSR4/5 are trademarks of Danaher Motion 

Kollmorgen. 

 

Dangerous voltages, currents, temperatures, and energy levels exist in this 
product and in the associated servomotor(s). Extreme caution should be 
exercised in the application of this equipment. Only qualified individuals 
should attempt to install, setup, and operate this equipment. Ensure that the 
motor, drive, and the end-user assembly are all properly grounded per NEC 
requirements. 

 

 

Danaher Motion Kollmorgen 

 

Phone: 1-800-777-3786 or (815) 226-3100 

Technical Support Fax: (540) 731-5679 

 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание BDS4 Series
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды