08
Press “On/Off” once. The product starts and enters the auto mode.
The user may make corresponding operation according to desired mode.
Press “
speed” to manually select high, medium and low;
Air flow
This function may be enabled only after “
speed” mode is manually
Air flow
selected.
Note: The anion function manually enabled is automatically disabled at
most 1h after working.
Timing set: increase timing by 0.5h and set timing for at most 8h. Long
press “Timing” to quickly increase the time. Stop pressing, the displayed
time is flashing three times and the set timing is determined.
Timing cancel: press “Timing” once after the timing is set to cancel the
timing function.
This function may be enabled only after “
speed” mode is manually
Air flow
selected.
Note: The UV function manually enabled is automatically disabled at
most 1h after working.
Detect the air quality and peculiar smell, automatically adjust the
air flow
speed and clean the air when the product is running in “Auto” mode.
Long press “Reset” 3s in the on status after
replacement. The
filter
indicator light is flashing three times and then off after reset.
Note: If the
is replaced before the
replacement indicator
filter
filter
light is on, the
timer will not be reset and will continue to calculate
filter
the service life of previous
. Therefore, the filter replacement
filter
indicator light may be on soon.
Long press “Child lock” key 3s to enable the child lock function.
Long press “Child lock” key 3s again to disable child lock.
Note: The other key operations are invalid after the child lock function
is enabled.